Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Cleaning & Sweep in Milford: What to Know First
We provide independent Olympia Chimney chimney cleaning and sweep service in Milford, with most inspections and cleanings completed in a single visit and upfront pricing agreed before we start. A standard Level 1 sweep for an Olympia Chimney system runs $89-$195, while a Level 2 camera inspection with full photo documentation runs $225-$375 depending on access and flue configuration. We’re not here to sell you parts you don’t need - we’ll show you what we find, explain it in plain English, and let you decide what to do next.
This page is for Milford homeowners with Olympia Chimney stainless steel liners, chimney caps, or venting products who want the job done correctly without the runaround. If you live near the Delaware River in one of the older homes with an Olympia liner installed in the last decade or two, you’re who we wrote this for. Call (610) 991-8179 - a live person answers, 24 hours a day.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia 316Ti flexible liner creosote bridging. The 316Ti alloy resists corrosion, but its corrugated interior traps glazed creosote in the valleys during Milford’s cold, damp shoulder seasons when homeowners burn wet or unseasoned hardwood. We remove it with rotary poly or wire whips sized to the exact corrugation depth, then verify draft with a digital manometer. Burning only seasoned wood for a full year after our sweep prevents recurrence.
- Olympia stainless cap mesh screen clogging from river valley cottonwood. The standard 3/4-inch mesh on Olympia Gelco-style caps fills with seed fluff each May and June along the Delaware, choking draft and pushing smoke into the house. We clean the screen in place when possible, or remove the cap for ultrasonic cleaning if buildup has baked on. For chronic problems, we retrofit a larger-mesh or hinged-access cap from the same Gelco line.
- Olympia oval-to-round adapter separation at the flue collar. The stamped adapter on older Olympia oval liners fatigues after 15-20 thermal cycles per season in a Milford winter, loosening at the crimp and leaking flue gas into the smoke chamber. We spot this during camera inspection, then re-secure with a proper draw band and refractory sealant rated to 2,000°F - never just more screws.
- Olympia chimney pot / crown interface leaks. The base flange on Olympia decorative pots sometimes gaps from the crown concrete after freeze-thaw in Pike County’s variable winters, letting water run behind the liner. We document the gap with photos you can see, then re-bed with HeatShield crown seal or recommend a full crown rebuild if the concrete is spalled through.
- Olympia direct-vent co-linear cap corrosion. The co-linear cap on high-efficiency Olympia direct-vent systems uses a lighter-gauge stainless that can pit where salt air from winter road treatment meets condensation - common on homes near Route 6 and I-84 corridors. We replace with a heavier-gauge Famco or Gelco equivalent, never a generic big-box cap that voids the venting warranty by altering intake/exhaust balance.
Our Olympia Chimney Chimney Cleaning & Sweep Process
- 1
Call and schedule. A live person answers, asks what you’re burning, how often, and what you’ve noticed - smell, smoke, draft, or nothing at all. We book a window and confirm by text.
- 2
Arrival and protection. Our technician arrives in uniform, lays down floor and hearth protection, and runs a Level 1 or Level 2 inspection based on what we discussed. For Olympia systems, we check the liner tag for alloy grade and installation date - information that guides everything after.
- 3
Camera inspection and documentation. The Level 2 camera goes up every flue. We photograph the liner walls, joints, cap, crown, and smoke chamber. You see the images on our tablet as we find them; no surprises in a report emailed later.
- 4
Cleaning with brand-appropriate tools. We select whip diameter and bristle stiffness for your specific Olympia liner corrugation and alloy. For 316Ti, we avoid overly aggressive wire that can work-harden the surface. Creosote and soot are HEPA-contained, not scattered through your living room.
- 5
Verdict and upfront pricing. Russell or the technician explains what the camera showed, what needs attention now, what can wait, and what each costs. Nothing moves forward without your okay and a signed estimate.
- 6
Test, cleanup, and guarantee. We run a post-sweep draft test, remove all protection, and leave the hearth cleaner than we found it. Every job carries our 90-Day Done Right Promise in writing - if it’s not right, we make it right, no paperwork and no arguing.
What Olympia Chimney Chimney Cleaning & Sweep Costs in Milford
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Level 1 sweep + basic inspection | $89-$195 | Number of flues, roof pitch, creosote severity |
| Level 2 camera inspection | $225-$375 | Access difficulty, number of appliance connections |
| Glazed creosote removal (rotary) | $150-$295 additional | Extent of glazing, liner length, access |
| Olympia cap cleaning or re-screening | $85-$175 | On-roof vs. removable, mesh type |
| Olympia liner joint repair / re-secure | $195-$450 | Number of joints, adapter type, sealant required |
These are Milford market ranges for Olympia Chimney systems specifically - not national guesses. Your exact estimate comes after we see your setup. Call (610) 991-8179 for a free, no-obligation quote.
Why Milford Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been sweeping chimneys in Milford and Pike County since 1984. That’s long enough to have serviced the same Olympia liner twice - once when it was new and again when it needed its first real attention. Our 90-Day Done Right Promise means if something isn’t right, we come back. No forms to file, no manager to escalate, just fixed.
Russell Haines trains every technician to treat an Olympia 316Ti liner with the respect its alloy deserves - not every sweep knows the difference between 304 and 316Ti, or why it matters for tool selection. When an Olympia part has aged out, we work with DuraFlex, HeatShield, Gelco, and Famco components that meet or exceed original spec, matched to your system’s duty cycle and your budget. And because a live person answers our phone at every hour, you won’t leave a message and wonder if anyone heard it.
FAQs
No. As an independent Olympia Chimney service provider, we use warranty-safe practices and document our work with photos. The warranty covers manufacturing defects, not maintenance - and skipping annual sweeps actually risks voiding it by allowing creosote damage to be blamed on neglect. If you have a specific warranty concern, we’ll review your installation paperwork with you on site. Call (610) 991-8179 and we’ll walk through it.
We source OEM Olympia components when they’re available and appropriate, but we don’t wait weeks for a cap screen when a Gelco or Famco equivalent meets the same spec and fits correctly. We’ll tell you which we’re proposing and why, with the price difference plain. No bait-and-switch, no mystery brand in a plain box.
The camera shows the difference. A liner with surface creosote and intact seams needs a sweep. A liner with separated joints, visible corrosion pitting, or draft failure under test needs repair or replacement. We show you both conditions on screen and explain which yours is. Sometimes the honest answer is “sweep it now, watch it annually” - and we’ll say so. Call (610) 991-8179 to schedule the inspection.
Once per burning season for wood-burning systems, per NFPA 211. In practice, Milford homeowners who burn four cords or more of hardwood often need mid-season attention - the combination of dense oak and cold-start firing common in this area produces more creosote than a warmer climate. Gas and oil systems need annual inspection with cleaning as indicated. We track your service history and remind you when it’s due.
Glazed creosote hardens to a fuel source that ignites at 451°F - well within normal flue temperatures. An Olympia 316Ti liner won’t burn through, but the chimney fire can damage surrounding masonry, warp the liner, or spread to the structure. Carbon monoxide risk rises if draft is compromised by blockage. Neither outcome is common, but both are serious and both are preventable. The $89 sweep is cheaper than the alternative. Call (610) 991-8179 to book before burning season.
Find out what is wrong, say so plainly, fix it right, and stand behind it. That’s how we’ve worked since Russell Haines started this company, and it’s how we’ll handle your Olympia Chimney system.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Milford and nearby areas.